Power Supply Board

Power Supply Board

DC Regulated Power Supply - How To Use It To Find Out Shorted Components In Main Board

Quite often whenever electronic equipment don’t function or work, we would immediately suspect a faulty switch mode power supply. But do you know that defective or shorted components in the motherboard or main board could cause the power supply to stop working too?

Switch mode power supply (SMPS) are designed so efficiently that whenever there is any short circuit occur in the main board the power supply would shut itself off and totally stop working. If you have no experience about troubleshooting switch mode power supply, you may think that the power supply have problem where in fact the main board is the real cause of no power problem.

Switch mode power supply have a current sense circuit (if you look at UC3842 PWM IC pin 3, it stated I-sense which mean current sense) and if there is short circuit in the secondary side (either in secondary diodes or main board), the current drawn would be increase and this will lead the PWM IC to stop generating output to the power fet and thus the power supply would shut down. All this happen in a split of seconds and you do not have the chance to know if there are output voltages at the secondary side.

Some older design of SMPS power supply do not use the PWM IC, but it do have the circuit to detect over current drawn and shut itself down whenever it detects a shorted component in the secondary side. One good example was the power supply used in printer. Printers usually have two boards; one was the power supply while the other was main board. If there is any short circuit in the main board, the power supply would not work. In order to isolate at where the problem is, one must remove the connector from the power supply board. Once the supply connector to the main board was removed, you can now switch on the printer and check if there is any voltages present at the power supply connector.

If there are zero voltages measured across all the supply (VCC) pins then we can conclude that the power supply have problem and you can put your whole concentration in this power supply board. What if there are voltages measured across the connector? This means that the main board is causing the no power problem most probably due to some shorted components in the main board.

For your information, dot-matrix printers usually required two voltages to function. One is the 5 Volts (for logic IC, eeprom and CPU) and the other is 30+ volts for the motors. The question now is how do we know if the main board is the main cause that shutting down the power supply? Very simple, just use your analog multimeter set to X 1 Ohm and measure between the supply pin (say 5 volts pin) and the main board ground and then reverse the probes. A good board should not show two similar reading and if you get two similar ohms reading then this means that the 5 volts line had shorted to ground through some faulty components.

If you have confirmed that the 5 volts line have problem then how do we find out the culprit since there are so many components connected to this line? TTL IC’s, CPU, EEPROM, transistors, diodes and even small filter capacitors are all connected to the 5 volts line. Either one of these components shorted could cause no power to the printer. You may remove each components lead (5 volt supply) in the main board and hope that the short circuit will be gone. Assuming if you happen to remove one of the filter capacitor pin and the short circuit is gone then we can say that the real culprit is the filter capacitor.

The real problem is what if the board has many components on it and this will consume lots of your time to isolate the problem by removing one pin at a time. It is not easy to identify the supply 5 volts pin to a spider IC that has 100 pins or more. Many spider IC’s have more than one 5 volts supply pin. Some even have 4 and some have 6 to 8 supply pins. Does this mean you have to check one pin at a time until you finally locate the fault? Not only that, to remove the supply pin from the spider IC’s and check for any short circuit between the grounds required a very good skill too. If you messed out the circuit board track, the main board can then be considered beyond repair. Even though you can repair the broken circuit track, this does not mean you have solved the actual fault!

Do you see the extra problem arise when you try to find out the fault? There must be some better way to tackle this kind of problem. Yes it is true that one can use ESR meter to slowly track to the source of the short circuit You can utilize the ESR meter to locate short-circuits on electronic boards by checking the actual track resistance. One probe connects to the ground and the other to the circuit line and if the measurement rises as you probe further along the track, you know that you are heading to the wrong direction! If the ESR value decreases as you move along the track then you are in the right direction. The problem is what if the main board has double layers, 4 or even 8 layers? You may be wasting lots of your precious time trying to track to the actual fault using the ESR meter method! After explaining so much about the problems, now is the time that you are waiting for to get the answer on how to solve this kind of fault fast.

Do you know that the DC regulated power supply besides using it to power up electronic circuit it can also be use to troubleshoot and find out a shorted component in a motherboard? Assuming you have confirmed that the VCC supply lines shorted to ground through some faulty components, you can easily detect it with the use of a variable digital DC regulated power supply. If you don’t have the digital one you can always use one with the analog panel meter which is cheaper.

Now connect the alligator clip from the positive output supply to the 5 volts VCC pin in the main board and the negative output to the main board ground as shown from the picture. Once everything was done, it’s time to switch on the dc regulated power supply. Slowly vary the knob clockwise and see the voltage increase. At the same time the current draw can be seen from the current digital meter readout. From experienced, if there is a short circuit in the main board, whenever the voltage is increase, the current will rise dramatically and if no short circuit there would be less current draw.

Okay back to this problem, if you observe that the current drawn also increase (rapidly) as proportion to the rise in voltage setting, you are now for sure that there is component shorted in the main board. What does this mean? It is a good news to us, because if the current drawn too much we can know the culprit by touching on the hottest components in the main board. Using your finger you can touch on any components that are very hot. Touch on the IC’s, diodes, transistors, capacitors and etc. Once you located that only one component that is extremely hot to touch then that was the culprit! That’s the real cause that you are trying to find! I’ve used this method to solved lots of main board problem and usually the culprit turned out to be a defective gate array and ram IC.

Why don’t I immediately turn the output voltage from the dc regulated power supply to 5 volts since the defective main board is also using 5 volts to run? If I do this and if the faulty components turned hot too fast, I’m afraid this will lead the faulty component to open circuit. If the faulty component open circuit, the current draw will drop and the only clue that you have to identify the culprit has been destroyed! If this thing happens then you may not have a higher rate to repair the board. Of course you still can by replacing one by one the SMD spider IC’s but this will surely eat up lots of your repair time.

The above method I’ve just mentioned is not limited only to printer main board; it can apply to other type of board as well like the computer motherboard, hard disk, dvd, vcd, industrial board and etc. Get a DC regulated power supply and I’m sure you can detect shorted component in the main board in the shortest time possible! By the way the specification of the DC regulated power supply that I’m using was 5A 30 volts (variable type). Have a good day my friend!

About the Author

Check out the two links below. You will be pleasantly surprised to find out that LCD and Electronic Repairs are so Easy and Highly Profitable for even a novice. You can learn the repairing secrets easily.

Find out How to Repair Any LCD Monitor - It is a breeze!

Learn the Secrets of Testing Electronic Components.

I dont know what to look for in a video card that will work with my mother board and power supply.?

I need to know if any of these video cards will work and how they will run games such as left 4 dead or call of duty world at war.

The HD4670 and 9500GTs should work just fine with your computer and power supply, because they all draw under 75 watts of electrical power. Note they do not have the 6-pin power connector that more powerful video cards which draw more than 75 watts require.

The 9600GT has a 6-pin, so it draws more than 75 watts, but not much more so it still should work with your machine. But if you want to play it safe, stick with the non-6-pin cards like the HD4670 and 9500GT.

Here are some excellent choices for

Power Supply Board

US Auctions Australian Auctions Austrian Auctions Belgian Auctions Canadian Auctions French Auctions German Auctions Indian Auctions Irish Auctions Italian Auctions Dutch Auctions Polish Auctions Spanish Auctions Swiss Auctions UK Auctions

Best Match Time: ending soonest Time: newly listed Price: lowest first Price: highest first Price + Shipping: lowest first Price + Shipping: highest first

Sony FD Trinitron WEGA KV 27HS420 27 1080i HD CRT Television    US $50.00

Samsung PN43D450 43 720p HD Plasma Television Parts AS IS    US $100.00

Vizio 47 E470VLE Flat LCD HDTV Full HD 1080p TV HDMI 8ms 1000001 Contrast    US $420.00

Vizio 47 E3D470VX 3D LCD HDTV 1080p WiFi 802n Apps TV 120Hz 2000001 Contrast    US $538.00

RCA CJRO56S Portable 5 INCH Black White VHF UHF Television with AM FM Radio    US $.99

Mitsubishi WD 73740 73 3D Ready 1080p HD DLP Internet TV    US $2,299.00

Vizio 37 E371VL Flat Panel LCD HDTV Full HD 1080p TV 65ms 1000001 Contrast    US $290.70

Portable Television Black White AM FM Radio Curtis    US $7.99

Brand New Samsung UN55D7050 55 Full 3D 1080p HD LED LCD Internet TV 3D Glases    US $1,635.00

AOC L19W981 19 LCD Television    US $20.50

16 720p LCD TV Monitor ViewSonic HDMI 16 inch HD 720 p 169 N1630w LOOKS GREAT    US $48.00

Panasonic Viera TC L32C3 32 LCD Television    US $349.90

Presidian portable LCD analog television unopened    US $24.00

Samsung B2230HD 215 Flat Panel LCD HDTV Monitor 1080p Television HDMI VGA RCA    US $113.25

Sharp Aquos LC 32D59U 32 inch LCD TV Refurbished    US $345.00

Magnavox 20MT1331 20 television    US $20.00

RETURNED VIZIO M3D420SR 42 FULL 3D 1080P HD LED LCD INTERNET TV 42 INCH 3D HDTV    US $500.00

Philips 42PF9630A 37 Plasma TV    US $152.50

Vizio 42 E3D420VX 3D LCD HDTV 1080p WiFi Apps TV 120Hz 2000001 Contrast    US $405.00

Sharp LC46E77U AQUOS 46 High definition 1080p 120Hz LCD TV open box REFURBIS    US $699.95

Supersonic SC 335 35 Portable LCD TV FM AVI Player SD    US $84.95

Mitsubishi WD 52525 52 1080i HD DLP Television Parts Not Working    US $.01

Viore PLCD7V2 7 Inch Portable LCD TV with Built In DVD    US $89.99

Colby 5 inch Portable Flat Screen LCD TV    US $32.00

rca d52w27 52 tv dvd    US $80.00

Samsung UN55C7000WF 55 Full 3D 1080p HD LED LCD Int TV 2 PAIR 3D GLASSES    US $2,450.00

NEW Coby LEDTV2226 22 1080p LED LCD TV 169 HDTV 1    US $186.95

Haier HLT10 10 480p EDTV LCD Television Potrable    US $36.00

Marantz TV Must Have Great Working Condion    US $.99

Samsung UN46D6050 46 1080p HD LED LCD Internet TV    US $999.99

Casio TV 970 23 LCD Television New in Factory Sealed Package    US $65.00

Polaroid FLM 2011 20 480p EDTV LCD Television    US $50.00

New Samsung UN32D4003 32 720p HD LED LCD Television    US $379.99

Viore LCD19VH56 19 1080i HD LCD Television DVD Player Combo    US $102.50

JVC AV 27020 27 Analog Television    US $12.00

Samsung UN40D5005 40 1080p HD LED LCD Television    US $519.99

Sharp LC 40LE835U 40 inch 3D LCD LED HDTV LC40LE835U Television    US $888.00

Samsung UN60D7000 New for 2011 60D7000 3D LED HD TV    US $3,200.00

Disney Cars C1310ATV 13 Inch TV Red    US $49.00

Maxent MX 42X3 42 720p HDTV Ready Plasma Television AS IS NO PIC    US $49.99

60 Plasma TV    US $1,350.00

Samsung UN60D6000 New for 2011 60D6000 3D LED HD TV    US $2,400.00

NEW Samsung P2570HD 25 1080p HDTV LCD Television    US $369.99

Samsung P2570HD 25 1080p HDTV LCD Television NOB    US $349.99

Panasonic Viera 50 Smart Plasma 1080 TV broken screen TC P50S30    US $21.50

Magnavox 32 lcd tv 32mf23id 37    US $46.00

NEW Samsung P2370HD 23 1080p Monitor HDTV LCD Television    US $342.99

Sony Grand Wega LCD Projection TV Model KDF 50E2000    US $479.00

Samsung P2370HD 23 1080p Monitor HDTV LCD Television    US $324.99

Toshiba 19HLV87 19 1080i HD LCD Television    US $99.99

Olevia 237T 37 1080i HD LCD Television    US $299.99

Sony Trinitron KV 32S40 32 CRT Television    US $11.00

Panasonic PT 56D29 56 Television    US $200.00

Portable Kitchen Widescreen Digital LCD Digital TV NEW    US $96.14

Haier HL15B 15 1080i HD LCD Television    US $75.00

NEW Digital Labs 7 Portable LCD TV w Remote DT191SA FREE Expedited shipping    US $94.95

Naxa NTD 1952 19 Widescreen HD LED Television DVD Play    US $212.49

Panasonic TC 54PS14 54 Plasma Television    US $899.95

SONY TV KE50 XBR900 PLASMA TV    US $650.00

Skyworth LED TV DVD Player All in One SLC 2269A 3 1080p 12 Volt Brand NEW    US $231.05

	HDMI Cable 2M (6 Feet) List Price: $39.99 Sale Price: $0.01
	Description Need an HDMI cable? Get reliable signal transfer for your HD video/audio without spending a fortune--complete with a lifetime warranty--with this six-foot HDMI cable from Inspiritech. Get reliable signal transfer for your HD video/audio without spending a fortune...

	AmazonBasics High-Speed HDMI Cable (6.5 Feet/2.0 Meters) - Supports Ethernet, 3D, and Audio Return [Newest Standard] Sale Price: $7.99

	Apple TV MC572LL/A (2010) List Price: $99.00 Sale Price: $97.98
	Description The sleek new Apple TV is small in size but big on entertainment. Rent from the largest selection of HD movies or rent TV shows in HD, commercial free. Stream directly from the huge catalog of Netflix titles...

	Mini DisplayPort to HDMI Female Adapter Cable for Apple Macbook, Macbook Pro... List Price: $29.95 Sale Price: $1.99
	Description Moshi's compact and stylish Mini DisplayPort to HDMI adapter seamlessly connects DisplayPort-equipped MacBook, MacBook Pro, MacBook Air, iMac, Mac mini or Mac Pro systems to any HDMI display. It supports both video and audio output to your HDMI display.

	Paper Thin Leaf Indoor HDTV Antenna - Made in the USA! List Price: $49.99 Sale Price: $37.95
	Description The patent pending Leaf indoor television antenna is a paper thin antenna that connects to your TV and mounts on the wall, behind a picture, or just about anywhere to enable you to receive free over-the-air broadcasts...

	Eforcity HDMI Cable, 10 feet List Price: $44.99 Sale Price: $0.01
	Description A premium high performance quality HDMI-HDMI cable suitable for use in HDTV, Home Theater, PlayStation 3, and business class projector based applications.

	Cheetah Mounts APTMM2B Flat Screen TV Wall Mount Bracket for 32-65-Inch Plasma LED LCD TV List Price: $89.99 Sale Price: $9.99
	Description The APTMM2 flat tilt mount features a slim 1.4-Inch profile from the wall to the back of your display. Additionally it has 0-15 degrees of tilt. The APTMM2 mount is constructed with 8LBS of 100% High Grade Steel providing a sturdy and reliable mount...

	Cheetah Mounts Plasma LCD Flat Screen TV Articulating Full Motion Dual Arm Wall Mount Bracket For 32-65" Displays Up To 165LBS Black With 10' High Speed HDMI Cable With Ethernet Fits Up To 24" Studs List Price: $189.96 Sale Price: $39.95
	Description This is a very substantial mount with Dual arms and heavy gauge steel. The arms extend over 20" from the wall yet fold to less than 4.25". Even at full extension, this mount has very little sag or twist...

	VideoSecu Tilt TV Wall Mount for Most 32"-60" LCD LED Plasma TV Flat Screen, Sturdy Steel Wall Plate Free HDMI Cable and 6" Bubble Level M43 List Price: $159.99 Sale Price: $20.00
	Description The VideoSecu MP501B is compatible with LED, LCD, and Plasma TVs and other flat panel display between 32 and 60 inches weigh less than 165lbs. Supports all VESA mounting standards up to 710x450mm and many odd size mounting patterns (mounting holes on the rear of the TV or panel should be no more than 28" apart horizontally and up to 17...

	AmazonBasics Digital Optical Audio Toslink Cable, 6 Feet Sale Price: $7.31
	Description The AmazonBasics TOSLINK Digital Audio Optical Cable helps you connect audio components when clear sound quality is your priority. This digital audio TOSLINK cable can be used to connect your CD and DVD players, digital satellite, and more to your preamplifier, receiver, audio processors, and digital-to-analog converters (DACs)...